 |
Zeiss TSK™ Contour Stylus Repair and Manufacturing - EMI Replacements | ||
EMI Replacement Stylus For Zeiss/Accretech/TSK Contour Measurement Systems |
|||
See below for more info: |
|||
 |
 |
||
Chisel/Knife Edge |
Cone/Conical |
||
Tungsten Carbide, 12° Tip Angle One-Sided Cut with 25µm Radius, 52.0mm Length (Zeiss/Accretech/TSK Part No. DM45501 | 625006-3092-000) for CONTOURECORD 1600/1700/1710/2600/2700/ and SURFCOM NEX |
Tungsten Carbide, 24° Included Conical Tip Angle with 25µm Radius, 52.0mm Length (Zeiss/Accretech/TSK Part No. DM45504 | 625006-3095-000) for CONTOURECORD 1600/1700/1710/2600/2700/ and SURFCOM NEX |
||
Tungsten Carbide, 12° Tip Angle One-Sided Cut with 25µm Radius, 26.0mm Length (Zeiss/Accretech/TSK Part No. DM45502 | 625006-3093-000) for CONTOURECORD 1600/1700/1710/2600/2700/ and SURFCOM NEX |
Tungsten Carbide, 24° Included Conical Tip Angle with 25µm Radius, 26.0mm Length (Zeiss/Accretech/TSK Part No. DM45505 | 625006-3096-000) for CONTOURECORD 1600/1700/1710/2600/2700/ and SURFCOM NEX |
||
|
Tungsten Carbide, 12° Tip Angle One-Sided Cut with 25µm Radius, 13.0mm Length (Zeiss/Accretech/TSK Part No. DM45503 | 625006-3094-000) for CONTOURECORD 1600/1700/1710/2600/2700/ and SURFCOM NEX |
Tungsten Carbide, 24° Included Conical Tip Angle with 25µm Radius, 13.0mm Length (Zeiss/Accretech/TSK Part No. DM45506 | 625006-3097-000) for CONTOURECORD 1600/1700/1710/2600/2700/ and SURFCOM NEX |
||
Tungsten Carbide Contour Stylus Tips available in cone or chisel type configurations. |
|||
| *EMI Gage is not affiliated with Zeiss TSK, or any of their affiliates. See also Terms and Conditions. | |||
 |
|||